Call Today Toll Free: 1-800-377-3244
Email your requirement: sales@coilws.com
Coil Winding Specialist
Custom Winding - Powder Cores
 
"We will wind anything for you"

If you can conceptualize it, draw it, sketch it or describe it, we can wind it for you. Of course, if you have an engineering print of it, we can serve you even better.


How they look like
Powder Core types
Applications

 
  • Iron Powder Cores for low cost applications -
  • Power and RF materials,
  • Toroidals, E-Cores, Pot Cores, Rods.
  • Permeability of 10 to 125
  • Flux densities: Up to 13,000 gausses ( 1.3 T)
  • CWS only uses those made by Micrometals
  • For more technical data, specifications, or to order these raw materials on line, please go to : www.cwsbytemark.com
  • Low Cost Chokes
  • Ligh Dimmer Chokes
  • 60 Hz differential EMI Line Chokes
  • DC Chokes
  • Power Factor Correction Chokes
  • Resonant Inductor
  • Fly Back Transformers
  • Small Carbonyl toroids for high Q and for military applications
  • MPP Cores for low loss applications -
  • Permeability of 26 to 300.
  • Premium material, lowest loss, high temperature stability.
  • Toroidals, E-Cores and Surface mount for high current application.
  • CWS uses MPP cores from Magnetics Inc, Arnold Engineering, CSC
  • For more technical data, specifications, or to order these raw materials on line, please go to : www.cwsbytemark.com
  • Military grade inductors and chokes
  • High Frequency applications
  • High ambient temperature applications - up to 150 deg C
  • High current application
  • Switching Regulators
  • In Line Noise Filters
  • Flyback Transformers
  • Pulse Transformers
  • High Flux cores for high flux swing applications -
  • Permeability of 60, 125
  • Saturation flux denisties to 15,000 gauss
  • Low residual flux density
  • CWS uses High Flux cores from Magnetics Inc, Arnold Engineering and CSC
  • For more technical data, specifications, or to order these raw materials on line, please go to : www.cwsbytemark.com
  • High current applications
  • High Frequency filtering
  • Switching Regulator Inductors
  • In-Line Noise Filters
  • Pulse transformers
  • Fly Back Transformer
  • PFC Chokes
  • Sendust or Koolmu cores - for low loss, nominal cost applications -
  • Permebaility of 60 and 125
  • Saturation flux density of 10,000 gauss
  • Supports large AC voltage without saturation
  • For more technical data, specifications, or to order these raw materials on line, please go to : www.cwsbytemark.com
  • High current applications
  • High Frequency filtering
  • Switching Regulator Inductors
  • In-Line Noise Filters
  • Pulse transformers
  • Fly Back Transformer
  • PFC Chokes

BACK to top of this page.
 
Need Power Magnetics? Then look no more! CWS delivers the finest in surface mount inductors, standard inductors, Power Transformers, Common Mode Chokes, Ceramic Chip Inductors and Wire Wound Chip Inductors. CWS can supply all of your filtering needs as well, including EMI Filters, RFI Filters, LC Filter Inductors, and Common Mode Filters. From Transmission Line Transformers to power transformers, CWS is the source to call!
We have direct crosses to all major manufacturers including Toko, CoilCraft, Coiltronics, Tokin, J.W. Miller, Arnold, Siemens, TDK, Gowanda, Taiyo Yuden and more! Call for details!

Your comments and suggestions are important to us, please feel free to email us at: sales@coilws.com
Call Us Toll Free: 1-800-377-3244
Copyright © 2001, Coilws.com, Inc