Sendust Cores used.
Capable of handling high DC bias current with minimal inductance roll off.
Surface Mount Leads packaged in tape and reel
Inductance : 3 uH, 6 uH, and 18 uH
DC Current Rating: 12 Amps, 7 Amps and 6 Amps
Profile Surface Mount Inductor Series using Sendust material
7mm and 10mm height, High Current Power
Surface Mount Inductor Construction
- Use of Flat Helix
winding to reduce DCR, size, and even heat dissipation
- Designed using
high saturation and high temperature stability Sendust with distributed
- Designed for
commercial, industrial and military application
- Ruggedized or
potted version for vibration heavy application available
- Operating temperature
range: -55 deg C to +105 deg C
- Inductance values
: 3 uH, 6 uH, and 18 uH
- Current rating
: 12 A, 7A, and 5A
DC Bias performance
1) No tooling or set up fees required for standard parts
2) Minimum order : 300 pcs in reel. Samples available
for large OEMs
3) Typical Delivery: Immediately
- 5A10 N
CWS : Family Type
5A10 : Series type
N : Revision
) The prices
shown below are for low volume quantity. Please call 800-377-3244
email email@example.com for larger
volume OEM pricing.
2 ) Our large
OEM pricing is extremely competitive. We will meet or beat any competitors
prices with better deliveries
) Custom designs
are available to meet any of your requirements. Please contact us
) The data shown below can be sorted by Part Number, Inductance, Rated Current, DRC, or any of the columns. To sort, please click on the column headings ( first row ). To sort "Part Number" in ascending order, click "Part Number" once. Click "Part Number" once again to sort it in descending order. Click on "Inductance" to sort Inductance column in ascending or descending order, etc..
Rated Current is based on a 40 deg C temperature rise at an ambient
temperature of 105 deg C.
Sendust cores does not exhibit thermal runaway, so a temperature rise
of 40 deg C is acceptable. The core and the wire's insulation can withstand
a temperature of 200 deg C.
|There are no products to list in this category.
Coil Winding Specialist, Inc., its affiliates, agents, and employees acting on behalf of Coil Winding Specialist, Inc. (collectively, “CWS”) disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.
CWS reserves the right at any time and from time to time to make changes to design, technical specification, or construction of any product listed on this website without notice. CWS also reserves the right to discontinue or limit sale of any product or service available throughout this website on temporary or permanently basis without notice.
CWS highly recommends customers not to use its products offered on this website for inappropriate use and applications. Products should be tested for its suitability by prospective customers in all possible applications and conditions. Customers using or selling CWS products for use in other than recommended applications do so entirely at their own risk and agree to fully indemnify CWS from any damages arising or resulting from such use or sale.
Any Comments, Suggestions or Questions? Contact us! Email: firstname.lastname@example.org
353 West Grove Ave. Orange, California 92865
Call us Toll Free: 1-800-679-3184 or 1 (800) 377-3244
Tel: (714) 279-9010,
Fax: (714) 279-9482
Copyright © 2008, Coil Winding Specialist, Inc
Updated July, 2013
CAGE Code: 5DME2(Registered with www.ccr.gov)