Please use side menu if you cannot use dropdown boxes, or the header boxes


www.ccr.gov
CAGE Code: 5DME2
ITAR Registration Code: M28889

- June 28th 2017 -
Call: 1 (800) 377-3244
We Are Open Monday-Friday 8 am - 5 pm PT
E-mail: sales@coilws.com


Laminated Power Transformer

Low Cost. Input of 115Vac and/or 230 Vac, 50Hz or 60 Hz Power Transformers. Silicon Steel Laminations.


Transformer 24v Class 2. Designed to meet ANSI, UL1585, CSA c22.2 No.66 40VA Inputs, 115Vac, 50/60 Hz Single Phase Outputs 24Vac. Silicon Steel Lamination Construction.

2.5VA to 56VA Rating. Output voltages from 5 Vac to 36 Vac. Dual primary windings for 115Vac ( if connected in parallel) or 230 Vac ( if connected in series). Dual output windings - can be parallel connected to double output current or series connected to double output voltage. PC and Chassis Mount construction. Designed to meet UL, VDE, CSA. Length of 1" to 3", Width from 1.3" to 2.5". Height of 1.1" to 1.8".

2.5VA to 47VA Rating. Output voltages from 10 Vac to 115 Vac. Dual primary windings for 115Vac ( if connected in parallel) or 230 Vac ( if connected in series). Dual output windings - can be parallel connected to double output current or series connected to double output voltage. PC Mount construction. Designed to meet UL, VDE, CSA. Length of 1.87" to 3.12", Width from 1.56" to 2.5". Height of 0.65 " to 1.37".

1.0VA to 24VA Rating. Output voltages from 5 Vac to 120 Vac. Single primary winding for 115Vac, 50/60 Hz. Dual output windings - can be parallel connected to double output current or series connected to double output voltage. PCB Mounting. Designed to meet UL, VDE, CSA. Length of 1.375" to 2.625 ", Width from 1.125" to 2.187 ". Height of 0.94 " to 1.57".

2.5VA to 96VA Rating. Output voltages from 10 Vac to 120 Vac. Center tap single output winding. Single primary winding for 115Vac input. Chassis Mount, with terminal lugs. Designed to meet UL, VDE, CSA. Length of 2 " to 4 ", Width from 1" to 2.5". Height of 1.2" to 3 "

Disclaimer: Coil Winding Specialist, Inc., its affiliates, agents, and employees acting on behalf of Coil Winding Specialist, Inc. (collectively, CWS) disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. CWS reserves the right at any time and from time to time to make changes to design, technical specification, or construction of any product listed on this website without notice. CWS also reserves the right to discontinue or limit sale of any product or service available throughout this website on temporary or permanently basis without notice. CWS highly recommends customers not to use its products offered on this website for inappropriate use and applications. Products should be tested for its suitability by prospective customers in all possible applications and conditions. Customers using or selling CWS products for use in other than recommended applications do so entirely at their own risk and agree to fully indemnify CWS from any damages arising or resulting from such use or sale.


Any Comments, Suggestions or Questions? Contact us! Email: sales@coilws.com
CWS 353 West Grove Ave. Orange, California 92865
Call us Toll Free: 1-800-679-3184 or 1 (800) 377-3244

Tel: (714) 279-9010, Fax: (714) 279-9482

Copyright 2008, Coil Winding Specialist, Inc
Updated July, 2013

CAGE Code: 5DME2(Registered with www.ccr.gov)