If you can conceptualize it, draw it, sketch it or describe it, we can wind it for you. Of course, if you have an engineering print of it, we can serve you even better.

LEADED POWER CHOKES AND POWER INDUCTORS :
The following are CWS very LOW COST series !!!

• POWER CHOKE : PCR SERIES - VERTICAL/HORIZONTAL MOUNT POWER INDUCTORS
  10 uH to 100 uH. Outside Diameter: 6mm to 8mm. Wound on ferrite rod cores.
  Iron Powder rod core versions for very large flux saturation available as custom
  
  
• POWER CHOKE : PV AND PVB SERIES - VERTICAL MOUNT POWER INDUCTORS
  1 uH to 500 uH. Current Rating : 1 A to 30 A. Height: 28mm. Wound on ferrite rod cores.
  
  
• POWER CHOKE : APC 6012 SERIES - AXIAL LEADED POWER INDUCTORS
  1 uH to 82 uH. Outside Diameter: 6mm. Wound on ferrite rod cores with leads
  Iron Powder leaded rod versions available as custom
  
  
• POWER CHOKE : M1114 SERIES - RADIAL LEADED SHIELDED POWER INDUCTORS
  10 mH to 730 mH. Outside Diameter: 11mm. Capped with ferrite sleeve

• POWER CHOKE: M1012 SERIES - RADIAL LEADED SHIELDED POWER INDUCTORS
  1 mH to 33 mH. Outside Diameter: 10mm. Capped with ferrite sleeve

• POWER CHOKE : M0711 SERIES - RADIAL LEADED SHIELDED POWER INDUCTORS
  22 uH to 12 mH. Outside Diameter: 7mm. Capped with ferrite sleeve

• POWER CHOKE : R1016 SERIES - LOW COST RADIAL LEADED POWER INDUCTORS
  1.0 uH to 820 uH. Outside Diameter: 10mm. UL tube or PVC wrapped
  26 mA to 550 mA. DCR: 3 milli ohms to 0.745 milli ohms

• POWER CHOKE : R0814 SERIES - LOW COST RADIAL LEADED POWER INDUCTORS
  2.2 uH to 820 uH. Outside Diameter: 8mm. UL tube or PVC wrapped
  43 mA to 650 mA. DCR: 7 milli ohms to 1.92 milli ohms

• POWER CHOKE : R0612 SERIES - LOW COST RADIAL LEADED POWER INDUCTORS
  1.0 uH to 82 uH. Outside Diameter: 10mm. UL tube or PVC wrapped
  290 mA to 1.73 Amps. DCR: 0.145 to 3.5 ohms

• TOROIDAL POWER CHOKE : OPC SERIES - TOROIDAL WITH BOBBIN BASE
  Core used are MPP, High Flux, Sendust/KoolMu and Iron Powder
  Mounted on a base/header for direct mount to PCB.
  Normally our customer specify the specs ( size, inductance, current)
  and we built to meet the specs.
  Inductance range from: 1uH to 100 mH
  Current range to 50 Amps

• TOROIDAL POWER INDUCTORS : J20 SERIES - HIGH CURRENT
  Designed using high saturation Powder Iron Cores with distributed air-gap.
  Through hole mounting.
  Normally our customer specify the specs ( size, inductance, current)
  and we built to meet the specs.
  Inductance range from: 0.3 uH to 50 mH
  Current range to 50 Amps
  
  
• CWS-112X SERIES OF OPEN TOROIDAL CHOKES AND TOROIDAL INDUCTORS
  Designed using powder iron cores for high saturation flux
  Normally our customer specify the specs ( size, inductance, current)
  and we built to meet the specs.
  Inductance range from: 2.4 uH to 4.0 mH
  Power handling range up to 500 watts
  
  
  TOROIDAL POWER INDUCTORS : HF SERIES HIGH FLUX TOROIDAL CHOKE
  Core used are MPP, High Flux, Sendust/KoolMu and Iron Powder
  Through hole mounting construction
  Normally our customer specify the specs ( size, inductance, current)
  and we built to meet the specs.
  Inductance range from: 10 uH to 100 mH
  Current range up to 50 Amps

• TOROIDAL POWER CHOKE: TC SERIES - TOROIDAL WITH SELF LEADS
  Core used are MPP, High Flux, Sendust/KoolMu and Iron Powder
  Leads directly mount to PCB, so min. wire used is AWG #22.
  Normally our customer specify the specs ( size, inductance, current)
  and we built to meet the specs.
  Inductance range from: 1uH to 1000 mH
  Current range to 100 Amps for custom built

Your comments and suggestions are important to us, please feel free to email us at: sales@coilws.com
Call Us Toll Free: 1- 800 - 377- 3244
Copyright © 2004, Coilws.com, Inc