- Available as through hole vertical
- Rated Voltage : 250 V AC/DC
- Single layer wound on high permeability ferrite cores with nylon casing to protect windings
- Spacer on casing provides 3mm creepage spacing to meet UL, CSA and IEC safety specifications
- All materials used are UL 94VO recognized.
-
Dimension : Outside Diameter: 17 mm. Width or Height: 13mm
-
Inductance range from: 0.6 mH to 5 mH
-
DCR : 35 milli ohms to 150 milli ohms
- Custom designs available
S Series of Common Mode Choke, Common Mode Inductor.
Direct Cross to TOKIN SC Series
|
Features:
- Compact and Lightweight
- Excellent Frequency Characteristics
- Small temperature rise, no influence on neighboring devices
- Can be used at 250V at primary AC side
- Exact Cross to TOKIN SC Series, but at a better cost and faster delivery
|
|
| |
|
APPLICATIONS:
- For Line Filter of Switching Power Supplies
- Countermeasures Against Static Noise at Power Lines and Signal Lines
- For TVs, Monitors and Audio Equipment
- For Line Filters of AC Adapters, Battery Chargers, etc
- For Sequence Controllers
- For AC Adapters and Battery Chargers With Switching Power Supplies
Test Conditions
- Rated Voltage: 250 V AC/DC
- Test Voltage 2000 V AC, one minute between lines
- Insulation resistance:at 500 V DC, more than 100 Mega-Ohms (between lines)
- Temperature range: -25 deg C to 105 deg C
- S coils are designed for EMI countermeasures
|
PART NUMBERING |
S-01-06G
|
S : Small Common Mode Choke
01 : Current Rating
06: 0.6 mH
G : Type |
|
|
| |
|
The prices shown below are for low volume quantity. Please call 800-377-3244 or
email sales@coilws.com for larger volume OEM pricing.
For very high volume, the pricing is under $1.00 each
|
|
|
