Call Today Toll Free: 1 (800) 377-3244
You can e-mail us your requirements: sales@coilws.com

"We will wind anything"


If you can conceptualize it, draw it, sketch it or describe it,we can wind it for you.
Sure enough, if you have an engineering print of it, we can serve you even better

HL SERIES : 3 AMPS TO 30 AMPS TOROIDAL COMMON MODE CHOKE

Toroidal Common Mode Line Chokes
  • Wound on nylon casing to protect windings
  • All insulating materials rated at 130 deg C or higher
  • Single layer wound for highest common-mode impedance over widest frequency range
  • UL 94VO recognized materials used
  • Meets 3mm creepage spacings for UL, CSA and IEC specifications
  • Available in either vertical or horizontal mount
  • Easy PC board mounting
  • Good vibration resistance
  • Exhibit excellent frequency response from 60 Hz to 500 Khz

SPECIFICATIONS

Click the button to see examples of our custom wound products.
We wind anything to meet your needs.
Please download the .PDF file in the
table below for dimensions and pin outs
Packaged in bulk only

APPLICATIONS:

  • Power Line Filtering
  • Noise Supression Of DC Circuit For Switching Regulator
  • Protects Primary AC Side From Being Affected By A Switching Regulator
  • Filters Noise From Ultrasonic Equipment
  • Filters Electrostatic Noise From Power And Signal Lines
  • Eliminates Contact Noise
  • Filters Incoming Spikes For ICS And Equipments Using Microcomputers
  • Minimizes Noise Emissions By Conforming To FCC, VCCI, FTZ, CISPR Regulations
  • Minimizes Noise Emissions From Inverters

PART NUMBERING

HL-H-151U-12A
HL : Common Mode Choke
H : Horizontal, V : Vertical
151U: Inductance
12A : Current Rating

The prices shown below are for low volume quantity. Please call 800-377-3244 or
email sales@coilws.com for larger volume OEM pricing.For high volume, the pricing is under $1.00 each

1. The data shown below can be sorted by Part Number, Inductance, Rated Current, DCR, or any of the header columns.
To sort click the column header. Click again to sort in reverse order.



(Searching Part Numbers, Inductance, Current fields)
Part Number Inductance Rated
Voltage		 Max D.C.
Resistance		 Rated
Current		 Mounting Max
Temp. Rise		 Price  
HL-H-302U-3A 3.00 mH 250V rated 179.8 milli-ohms combined 3 Amps Horizontal 41 $4.50
Buy Now
  
HL-V-302U-3A 3.00 mH 250V rated 179.8 milli-ohms combined 3 Amps Vertical 41 $4.50
Buy Now
  
HL-H-152U-5A 1.50 mH 250V rated 63.6 milli-ohms combined 5 Amps Horizontal 40 deg. C $4.50
Buy Now
  
HL-V-152U-5A 1.50 mH 250V rated 63.6 milli-ohms combined 5 Amps Vertical 40 deg. C $4.50
Buy Now
  
HL-H-102U-5A 1.00 mH 250V rated 52.9 milli-ohms combined 5 Amps Horizontal 40 $4.50
Buy Now
  
HL-H-102U-6A 1.00 mH 250V rated 44.4 milli-ohms combined 6 Amps Horizontal 40 $4.50
Buy Now
  
HL-V-102U-5A 1.00 mH 250V rated 52.9 milli-ohms combined 5 Amps Vertical 40 deg. $4.50
Buy Now
  
HL-V-102U-6A 1.00 mH 250V rated 44.4 milli-ohms combined 6 Amps Vertical 40 deg. $4.50
Buy Now
  
HL-H-801U-8.5A 0.80 mH 250V rated 20 milli-ohms combined 9 Amps Horizontal 35 $4.50
Buy Now
  
HL-H-601U-10A 0.60 mH 250V rated 15.4 milli-ohms combined 10 Amps Horizontal 38 deg. C $4.50
Buy Now
  
HL-V-601U-10A 0.60 mH 250V rated 15.4 milli-ohms combined 10 Amps Vertical 38 $4.50
Buy Now
  
HL-V-601U-9B 0.60 mH 250V rated 10 milli-ohms combined 9 Amps Vertical 25 $4.50
Buy Now
  
HL-H-601U-9B 0.60 mH 250V rated 10 milli-ohms combined 9 Amps Horizontal 25 deg C $4.50
Buy Now
  
HL-V-301U-15A 0.30 mH 250V rated 7.3 milli-ohms combined 15 Amps Vertical 40 $4.50
Buy Now
  
HL-H-301U-15A 0.30 mH 250V rated 7.3 milli-ohms combined 15 Amps Horizontal 40 deg. C $4.50
Buy Now
  
HL-H-201U-18A 0.20 mH 250V rated 5 milli-ohms combined 18 Amps Horizontal 39 $4.50
Buy Now
  
HL-V-201U-18A 0.20 mH 250V rated 5 milli-ohms combined 18 Amps Vertical 39 $4.50
Buy Now
  
HL-V-201U-15A 0.20 mH 250V rated 5 milli-ohms combined 15 Amps Vertical 29 $4.50
Buy Now
  
HL-H-201U-15A 0.20 mH 250V rated 5 milli-ohms combined 15 Amps Horizontal 29 $4.50
Buy Now
  
HL-V-151U-30A 0.15 mH 250V rated 3.5 milli-ohms combined 30 Amps Vertical 40 $4.50
Buy Now
  
HL-H-151U-20A 0.15 mH 250V rated 3.4 milli-ohms combined 20 Amps Horizontal 33 deg C $4.50
Buy Now
  
HL-V-151U-20A 0.15 mH 250V rated 3.4 milli-ohms combined 20 Amps Vertical 33 deg C $4.50
Buy Now
  
HL-V-101U-30A 0.10 mH 250V rated 3.0 milli-ohms combined 30 Amps Vertical 40 $4.50
Buy Now
  
HL-H-101U-30A 0.10 mH 250V rated 3.0 milli-ohms combined 30 Amps Horizontal 40 deg C $4.50
Buy Now
  

Need Power Inductors? CWS delivers the finest in surface mount inductors and standard inductors, power transformers, Common Mode Chokes, Ceramic Chip Inductors and Wire Wound Chip Inductors. CWS can supply all of your filtering needs as well, including EMI Filters, RFI Filters, LC Filter Inductors, and Common Mode Filters. From Transmission Line Transformers to power transformers, CWS is the source to call!

Disclaimer: Coilws.com, Inc. reserves the right at any time and from time to time to make changes to design, technical specification, or construction of any product listed on this website without notice. Coilws.com, Inc. also reserves the right to discontinue or limit sale of any product or service available throughout this website on temporary or permanently basis without notice. Coilws.com, Inc. highly recommend customers not to use its products offered on this website for inappropriate use and applications. Products should be tested for its suitability by prospective customers in all possible applications and conditions.

Please note: Cross References are only equivalent products and may have some variations. In no way cross references can be interpreted as precise reproduction of products offered by cross reference supplier.


Your comments and suggestions are important to us, please feel free to email us at : sales@coilws.com
Call us Toll Free: 1(800) 377-3244
Copyright © 2008, Coilws.com, Inc
Updated Jan, 2008