www.ccr.gov
CAGE Code: 5DME2
ITAR Registration Code: M28889

- November 1st 2020 -
Call: 1 (800) 377-3244
We Are Open Monday to Friday 8 A.M. - 5 P.M. (Pacific Time)
E-mail your questions and requirements at: sales@coilws.com

*Site Under Reconstruction
*Please contact us for available stock.
Stock quantity of zero may be reflected as it is not implemented yet.

1008 Series Inductor - Dimensions Specification

1008 Series Inductor - WOUND CERAMIC CHIP INDUCTOR : DIMENSIONS SPECIFICATION

DIMENSIONS : (m/m) Note: 1 inch = 25.4mm

SERIES
A
B
C
D
E
G
H
I
CCI-1008
2.5 +-0.2
2.0+-0.2
1.6+-0.2
0.5
0.5
1.2
1.8
1.3

 


 

MATERIALS

  • CORE : CERAMIC FOR HIGH FREQUENCY OPERATION
  • WIRE : ENAMELLED COPPER WIRE
  • TERMINAL : Mo/Mn+Ni+Au OR PD/Pt/Ag+Ni+Sn/Pb
  • ENCAPSULATE : EPOXY RESIN
 

 

GENERAL CHARACTERISTICS

  • TEMPERATURE RISE : 40ºC MAX
  • RATED CURRENT : CURRENT THAT WILL CAUSE INDUCTANCE TO DROP WITHIN 10% MAX
  • STORAGE TEMP : -25º ~ + 85ºC
  • OPERATING TEMP : -20ºC ~ +80ºC
  • RESISTANCE TO SOLDER HEAT : 260ºC 10 SECS DURING RE-FLOW
 

Need Power Magnetics? Then look no more! CWS ByteMark delivers the finest in surface mount and standard inductors like Power Transformers, Common Mode Chokes, Ceramic Chip Inductors and Wire Wound Chip Inductors. CWS ByteMark can supply all of your filtering needs as well, including EMI Filters, RFI Filters, LC Filter Inductors, and Common Mode Filters. From Transmission Line Transformers to power transformers, CWS ByteMark is the source to call!
 
We have direct crosses to all major manufacturers including Toko, CoilCraft, Coiltronics, Tokin, J.W. Miller, Arnold, Siemens, TDK, Gowanda, Taiyo Yuden and more! Call for details!

Disclaimer: Coil Winding Specialist, Inc., its affiliates, agents, and employees acting on behalf of Coil Winding Specialist, Inc. (collectively, CWS) disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. CWS reserves the right at any time and from time to time to make changes to design, technical specification, or construction of any product listed on this website without notice. CWS also reserves the right to discontinue or limit sale of any product or service available throughout this website on temporary or permanently basis without notice. CWS highly recommends customers not to use its products offered on this website for inappropriate use and applications. Products should be tested for its suitability by prospective customers in all possible applications and conditions. Customers using or selling CWS products for use in other than recommended applications do so entirely at their own risk and agree to fully indemnify CWS from any damages arising or resulting from such use or sale.

WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go towww.P65Warnings.ca.gov.


Any Comments, Suggestions or Questions? Contact us! Email: sales@coilws.com
CWS 353 West Grove Ave. Orange, California 92865
Call us Toll Free: 1-800-679-3184 or 1 (800) 377-3244

Tel: (714) 279-9010, Fax: (714) 279-9482

Copyright 2008, Coil Winding Specialist, Inc
Updated July, 2013

CAGE Code: 5DME2(Registered with www.ccr.gov)