MPP SERIES - CUSTOM DESIGNED, OPEN CONSTRUCTION TOROIDAL POWER INDUCTORS / CHOKES

MPP cores used for low loss and high temperature application Capable of handling very high DC bias current with minimal inductance roll off. Vertical or Horizontal through hole mount with pre-tinned leads that can be directly soldered to PCB Customer specific specifications ( size, inductance, current) and we built to meet these specs. Inductance range from: 10 nH to 200 uH Current range to 10 Amps to 200 Amps Custom designs available

MPP Series High Current Power Inductors.
Multi Lead Through Hole Mounting Construction

FEATURES:

CUSTOM DESIGNS to meet your specific requirements

Designed using high saturation and high temperature stability MPP or "MolyPermalloy Powder Cores" with distributed air-gap

Excellent electromagnetic shielding due to toroidal design

Designed for commercial, industrial and military application

Operating temperature range: -55 deg C to +95 deg C

Inductance values from 10 nH to 200 uH

Current rating from 10 Amps to 100 Amps

SPECIFICATIONS

	Click the button to see examples of our custom wound products. We wind anything to meet your needs.
	Download Engineering Drawing in .PDF
	-55 to + 95 deg C Ambient Operation
	Please see table below and Engineering Drawings (.PDF) for dimensions

IMPORTANT
1) No tooling or set up fees required for standard parts
2) Minimum order : 1 Piece. Samples available for large OEMs
3) Typical Delivery: 1 to 2 weeks

CONSTRUCTION INFORMATION

Outline Drawing and Schematic

Part Numbering

10445 - 5.5U - 60A

10445 : Series type
5.5U : 5.5 uH
60A: 60 amps

Notes:
1 ) The prices shown below are for low volume quantity. Please call 800-377-3244 or
email sales@coilws.com for larger volume OEM pricing.
2 ) Our large OEM pricing is extremely competitive. We will meet or beat any competitors prices with better deliveries
3 ) Custom designs are available to meet any of your requirements. Please contact us
4 ) The data shown below can be sorted by clicking each column header.Click once again to sort in reverse order.
5) Rated Current is based on a 40 deg C temperature rise at an ambient temperature of 95 deg C.
MPP cores does not exhibit thermal run-away, so a temperature rise of 40 deg C is acceptable. The core and the wire's insulation can withstand a temperature of 200 deg C.

Displaying 1 to 6 (of 6 products)

(Searching Part Numbers, Inductance, Current fields)

Part Number	Inductance	Current Rating	Inductance at full Current Rating	DCR Max	L down 20% at	Dimension OD x Width inches	Leads Dia inches	Price
MPHC400-150M-65A	15.00 uH	65 Amps	3 uH	1 milli ohm	19 Amps	1.75 x 0.75	0.072 x 3	$15.00
10445-10U-60A	10.00 uH	60 Amps	2 uH	1 milli ohm	16 Amps	1.55 x 0.77	0.08 x 3	$12.00
MP270-100M-50A	10.00 uH	50 Amps	10 uH	1.5 milli ohm	25 Amps	1.40 x 0.85	0.08 x 3
MP270-100M-15A	10.00 uH	15 Amps	10 uH	4.0 milli ohm	8 Amps	1.35 x 0.77	0.08 x 2
10445-5.5U-60A	5.50 uH	60 Amps	3 uH	1 milli ohm	30 Amps	1.55 x 0.77	0.08 x 3	$12.00
10445-5U-60A	5.00 uH	60 Amps	4 uH	1 milli ohm	55 Amps	1.65 x 0.87	0.08 x 3	$12.00

Displaying 1 to 6 (of 6 products)

"We will wind anything"

MPP SERIES - CUSTOM DESIGNED, OPEN CONSTRUCTION TOROIDAL POWER INDUCTORS / CHOKES

Featured [more]