If you can conceptualize it, draw it, sketch it or describe it, we can wind it for you. Of course, if you have an engineering print of it, we can serve you even better.

Selection Guide to UNSHIELDED Surface Mount Inductors

These low cost power inductors and wire wound chip inductors are used in LC resonant circuits such as oscillators, signal generators impedance matching, circuit isolations, RF filters, and other telecommunication applications. The ceramic core types have very high SRF ( self resonant frequency ) for very high frequency applications. The typical SRF for a ceramic chip inductor (CCI-0805, CCI-1008 and CCI-1210) is around 500 Mhz. Coil Windings Specialist (CWS) parent company manufactures one of the most comprehensive line of power inductors and chip inductors. These are manufactured at our ISO9000 approved Shen-Zhen, China, facility with a size of 950,000 square foot and a capacity of 5 million pieces per month.

• 141107 Series Power Inductor / CHOKE COIL
  (up to 10.6A, 7mm Height)

• 4431 Series Power Inductor / CHOKE COIL
  (up to 1.34A, 3mm Height)

• 453226 Series Power Inductor / CHOKE COIL
  (up to 500mA, 2.6mm Height)

• 201407 High Current Power Inductor / CHOKE COIL
  (up to 16A rms, 7mm Height)

• SI 1210 Series Chip Inductor / WOUND CHIP INDUCTOR
  (up to 450mA, 2.2mm Height, up to 220µh)

• SI 1812 Series Chip Inductor / WOUND CHIP INDUCTOR
  (up to 460mA, 302mm Height, up to 1000µh)

• CCI 1210 Series Chip Inductor / WOUND CERAMIC CHIP INDUCTOR
  (up to 600mA, 2.7mm Height, up to 100µh)

• CCI 1008 Series Chip Inductor / WOUND CERAMIC CHIP INDUCTOR
  ( up to 600mA, 2.0mm Height, up to 100µh)

• CCI 0805 Series Chip Inductor / WOUND CERAMIC CHIP INDUCTOR
  (up to 600mA, 1.2 mm Height, up to 250µh)

• SAC 0805 Series Inductor / Surface Mount AIR COIL
  (up to 1200mA, 1.9 mm Height)

Your comments and suggestions are important to us, please feel free to email us at: sales@coilws.com
Call Us Toll Free: 1-800-377-3244
Copyright © 2001, Coilws.com, Inc